Us Historymr. Mac's Room

Created by Donald P. With David James Elliott, Catherine Bell, Patrick Labyorteaux, John M. The cases of Harmon Rabb, former Navy fighter pilot, and his fellow lawyers of the U.S. Navy's Judge Advocate General's office. Due to increased security and permissions with Mac OS 10.14 Mojave and 10.15 Catalina, you will be prompted to authorize the Zoom Desktop Client and Zoom Rooms to use the microphone, camera, and on Mac OS 10.15 Catalina, screen recording. You will also be prompted to allow the Zoom Desktop Client to allow others to remotely control your desktop. A Guide for the Control of Audible Sound Hazards. This guide is designed to provide additional guidance for users of the Threshold Limit Value (TLV ®) for occupational exposure to audible sound, which recommends levels of exposure and conditions under which it is believed that nearly all healthy workers may be repeatedly exposed, day after day, without adverse health effects. Refrain 1: Mac Miller I waste away in a room spittin' these raps Yahweh put the world in my hands, I'm givin' it back, yep Chorus: Niki Randa It's a gift (Our) Our time to be alive No earthly. MAC'S HISTORY CLASSES!! Home US History AP US History. Academic Decathlon STAAR Leadership Welcome. 2018-2019ushistorysyllabus.pdf: File Size: 197 kb: File.

Optimized Storage helps you save storage space space by storing your content in iCloud and making it available on demand:

  • When storage space is needed, files, photos, movies, email attachments, and other files that you seldom use are stored in iCloud automatically.
  • Each file stays right where you last saved it, and downloads when you open it.
  • Files that you’ve used recently remain on your Mac, along with optimized versions of your photos.

If you haven't yet upgraded to macOS Sierra or later, learn about other ways to free up storage space.

Find out how much storage is available on your Mac

Choose Apple menu  > About This Mac, then click Storage. Each segment of the bar is an estimate of the storage space used by a category of files. Move your pointer over each segment for more detail.

Click the Manage button to open the Storage Management window, pictured below.

Manage storage on your Mac

The Storage Management window offers recommendations for optimizing your storage. If some recommendations are already turned on, you will see fewer recommendations.

Store in iCloud

Click the Store in iCloud button, then choose from these options:

  • Desktop and Documents. Store all files from these two locations in iCloud Drive. When storage space is needed, only the files you recently opened are kept on your Mac, so that you can easily work offline. Files stored only in iCloud show a download icon , which you can double-click to download the original file. Learn more about this feature.
  • Photos. Store all original, full-resolution photos and videos in iCloud Photos. When storage space is needed, only space-saving (optimized) versions of photos are kept on your Mac. To download the original photo or video, just open it.
  • Messages. Store all messages and attachments in iCloud. When storage space is needed, only the messages and attachments you recently opened are kept on your Mac. Learn more about Messages in iCloud.

Storing files in iCloud uses the storage space in your iCloud storage plan. If you reach or exceed your iCloud storage limit, you can either buy more iCloud storage or make more iCloud storage available. iCloud storage starts at 50GB for $0.99 (USD) a month, and you can purchase additional storage directly from your Apple device. Learn more about prices in your region.

Optimize Storage

Click the Optimize button to save space by automatically removing watched movies and TV shows. When storage space is needed, movies or TV shows that you purchased from Apple and already watched are removed from your Mac. Click the download icon next to a movie or TV show to download it again.

Your Mac will also save space by keeping only recent email attachments on this Mac when storage space is needed. You can manually download any attachments at any time by opening the email or attachment, or saving the attachment to your Mac.

Optimizing storage for movies, TV shows, and email attachments doesn't require iCloud storage space.

Empty Trash Automatically

Empty Trash Automatically permanently deletes files that have been in the Trash for more than 30 days.

Reduce Clutter

Reduce Clutter helps you identify large files and files you might no longer need. Click the Review Files button, then choose any of the file categories in the sidebar, such as Applications, Documents, Music Creation, or Trash.

You can delete the files in some categories directly from this window. Other categories show the total storage space used by the files in each app. You can then open the app and decide whether to delete files from within it.

Learn how to redownload apps, music, movies, TV shows, and books.


Where to find the settings for each feature

The button for each recommendation in the Storage Management window affects one or more settings in other apps. You can also control those settings directly within each app.

  • If you're using macOS Catalina or later, choose Apple menu  > System Preferences, click Apple ID, then select iCloud in the sidebar: Store in iCloud turns on the Optimize Mac Storage setting on the right. To turn off iCloud Drive entirely, deselect iCloud Drive.
  • If you're using macOS Mojave or earlier, choose Apple menu > System Preferences, click iCloud, then click Options next to iCloud Drive. Store in iCloud turns on the Desktop & Documents Folders and Optimize Mac Storage settings.
  • In Photos, choose Photos > Preferences, then click iCloud. Store in iCloud selects iCloud Photos and Optimize Mac Storage.
  • In Messages, choose Messages > Preferences, then click iMessage. Store in iCloud selects Enable Messages in iCloud.
  • If you're using macOS Catalina or later, open the Apple TV app, choose TV > Preferences from the menu bar, then click Files. Optimize Storage selects “Automatically delete watched movies and TV shows.”
  • In you're using macOS Mojave or earlier, open iTunes, choose iTunes > Preferences from the menu bar, then click Advanced. Optimize Storage selects “Automatically delete watched movies and TV shows.”
  • In Mail, choose Mail > Preferences from the menu bar, then click Accounts. In the Account Information section on the right, Optimize Storage sets the Download Attachments menu to either Recent or None.

Empty Trash Automatically: From the Finder, choose Finder > Preferences, then click Advanced. Empty Trash Automatically selects “Remove items from the Trash after 30 days.”

Other ways that macOS helps automatically save space

With macOS Sierra or later, your Mac automatically takes these additional steps to save storage space:

  • Detects duplicate downloads in Safari, keeping only the most recent version of the download
  • Reminds you to delete used app installers
  • Removes old fonts, languages, and dictionaries that aren't being used
  • Clears caches, logs, and other unnecessary data when storage space is needed

How to free up storage space manually

Even without using the Optimized Storage features described in this article, you can take other steps to make more storage space available:

  • Music, movies, and other media can use a lot of storage space. Learn how to delete music, movies, and TV shows from your device.
  • Delete other files that you no longer need by moving them to the Trash, then emptying the Trash. The Downloads folder is good place to look for files that you might no longer need.
  • Move files to an external storage device.
  • Compress files.
  • Delete unneeded email: In the Mail app, choose Mailbox > Erase Junk Mail. If you no longer need the email in your Trash mailbox, choose Mailbox > Erase Deleted Items.

Learn more

  • The Storage pane of About This Mac is the best way to determine the amount of storage space available on your Mac. Disk Utility and other apps might show storage categories such as Not Mounted, VM, Recovery, Other Volumes, Free, or Purgeable. Don't rely on these categories to understand how to free up storage space or how much storage space is available for your data.
  • When you duplicate a file on an APFS-formatted volume, that file doesn't use additional storage space on the volume. Deleting a duplicate file frees up only the space required by any data you might have added to the duplicate. If you no longer need any copies of the file, you can recover all of the storage space by deleting both the duplicate and the original file.
  • If you're using a pro app and Optimize Mac Storage, learn how to make sure that your projects are always on your Mac and able to access their files.
-->

A room mailbox is a resource mailbox that's assigned to a physical location, such as a conference room, an auditorium, or a training room. With room mailboxes, users can easily reserve these rooms by including room mailboxes in their meeting requests. When they do this, the room mailbox uses options you can configure to decide whether the invite should be accepted or denied.

To create a room mailbox, you need to be an administrator who's a member of either the Organization Management or Recipient Management role groups.

If you want to grant someone access to a room mailbox so they can directly manage its calendar (for example, an assistant who needs to make room for an executive meeting), you can do so using the instructions in Manage permissions for recipients. After a user's been granted permissions to access a room mailbox, they can open the mailbox using the instructions in Open and use a shared mailbox in Outlook for Windows.

IMPORTANT Room mailboxes should never be set as the organizer of a meeting, nor should room mailboxes be accessed directly by users in order to make changes to a meeting. Rooms should only be added to meetings in the Attendee or Location fields. Otherwise you will override the Resource Booking Assistant (RBA), which manages and processes all calendar items sent to the room mailbox, and unexpected errors may occur. If your organization has one or more users who need to manage a room and its mailbox, then assign users to the room as resource delegates for the room mailbox, as described later in this article. When a delegate is assigned, all items sent to the room's mailbox will be directed to the booking delegate, who can then accept or decline from their own Inbox. If your organization wants to use a room mailbox like a team calendar, consider using Exchange's shared calendar features.

If you want to learn about the types of recipients that are available in Exchange Server, check out Recipients. For info about another type of resource mailbox, check out Manage equipment mailboxes.

What do you need to know before you begin?

  • Estimated time to complete: 5 minutes.

  • To open the Exchange admin center (EAC), see Exchange admin center in Exchange Server. To open the Exchange Management Shell, see Open the Exchange Management Shell.

  • You need to be assigned permissions before you can perform this procedure or procedures. To see what permissions you need, see the'Recipient Provisioning Permissions' section in the Recipients Permissions topic.

  • For information about keyboard shortcuts that may apply to the procedures in this topic, see Keyboard shortcuts in the Exchange admin center.

  • If you're using room or equipment mailboxes in Microsoft 365 or Office 365, see [Room and equipment mailboxes(https://docs.microsoft.com/microsoft-365/admin/manage/room-and-equipment-mailboxes) for more information.

Important

If you're running Exchange 2013 in a hybrid scenario, make sure you create the room mailboxes in the appropriate place. Create your room mailboxes for your on-premises organization on-premises, and room mailboxes for Exchange Online should be created in the cloud. > Having problems? Ask for help in the Exchange forums. Visit the forums at: Exchange Server, Exchange Online, or Exchange Online Protection.

Create a room mailbox

  1. In the Exchange admin center, navigate to Recipients > Resources.

  2. To create a room mailbox, click New > Room mailbox.

  3. Use the options on the page to specify the settings for the new resource mailbox.

    • Room name: Use this box to type a name for the room mailbox. This is the name that's listed in the resource mailbox list in the Exchange admin center and in your organization's address book. This name is required and it can't exceed 64 characters.

    Tip

    Although there are other fields that describe the details of the room (for example, Location and Capacity) consider summarizing the most important details in the room name using a consistent naming convention. Why? So users can easily see the details when they select the room from the address book in the meeting request.

    • Alias: A room mailbox has an email address so it can receive booking requests. The email address consists of an alias on the left side of the @ symbol, which must be unique in the forest, and your domain name on the right. The alias is required.

    • Location, Phone, Capacity: You can use these fields to enter details about the room. However, as explained earlier, you can include some or all of this information in the room name so users can see it.

  4. When you're finished, click Save to create the room mailbox.

After you've created a room mailbox, you can Change how a room mailbox handles meeting requests (including whether it responds automatically or someone needs to decide what to do). By default, it'll automatically accept or decline requests depending on whether the requests conflict with any existing meetings on its calendar. It'll also allow meetings that repeat, and allow meetings up to 180 days from the current date (and decline any requests beyond that) that are up to 24 hours in duration. If you want to change other options, head down to Change other room mailbox properties.

For information on how to create a room mailbox using the Exchange Management shell, see Examples 2 and 3 in New-Mailbox.

Change how a room mailbox handles meeting requests

  1. In the Exchange admin center, navigate to Recipients > Resources.

  2. In the list of resource mailboxes, click the room mailbox that you want to change the properties for, and then click Edit .

  3. On the room mailbox properties page, click Booking Delegates (allow automatic responses or not) or Booking Options (allow repeating meetings, decline meetings that are scheduled too far out, etc).

Use the Booking Delegates section to view or change how the room mailbox handles meeting requests and to define who can accept or decline booking requests if it isn't done automatically.

  • Select one of the following options to handle meeting requests.

    • Accept or decline booking requests automatically: If this is selected, the meeting request will automatically be declined if there's a scheduling conflict with an existing reservation, or if the booking request violates the scheduling limits of the resource, for example, the reservation duration is too long.

    • Select delegates who can accept or decline booking requests: If this is selected, one of the people you added to the Delegates list below will be responsible for accepting or declining meeting requests that are sent to the room mailbox. If you assign more than one resource delegate, only one of them has to act on a specific meeting request.

Use the Booking Options section to view or change the settings for the booking policy that defines when the room can be scheduled, how long it can be reserved, and how far in advance it can be reserved.

  • Allow repeating meetings: This setting allows or prevents repeating meetings for the room.

  • Allow scheduling only during working hours: This setting accepts or declines meeting requests that aren't during the working hours defined for the room, which are, by default, 8:00 A.M. to 5:00 P.M. Monday through Friday. You can configure the working hours of the room mailbox either by logging into the mailbox using Outlook on the web and going to the Options > Calendar > Calendar appearance page, or by using Set-MailboxCalendarConfiguration.

  • Always decline if the end date is beyond this limit: This setting controls the behavior of repeating meetings that extend beyond the date specified by the maximum booking lead time setting.

    • If you enable this setting, a repeating booking request is automatically declined if the bookings start on or before the date specified by the value in the Maximum booking lead time box, and they extend beyond the specified date. This is the default setting.

    • If you disable this setting, a repeating booking request is automatically accepted if booking requests start on or before the date specified by the value in the Maximum booking lead time box, and they extend beyond the specified date. However, the number of bookings is reduced so bookings won't occur after the specified date.

  • Maximum booking lead time (days): This setting specifies the maximum number of days in advance that the room can be booked. Valid input is an integer between 0 and 1080. The default value is 180 days.

  • Maximum duration (hours): This setting specifies the maximum duration that the room can be reserved in a booking request. A valid value is an integer from 0 through 35791394. The default value is 24 hours. When the value is set to 0, the maximum duration of a meeting is unlimited.

    For repeating booking requests, the maximum booking duration applies to the length of each instance of the repeating booking request.

There's also a box on this page that you can use to write a message that will be sent to users who send booking requests to reserve the room.

Change resource scheduling settings

An Admin or user with full access to the resource mailbox can make changes to the resource scheduling settings.

  1. Log in to Outlook Web App and click on Your name in the top right corner.

  2. Click Open another mailbox. Locate the meeting room resource you want and click Open.

  3. Go to settings and click Calendar.

  4. Navigate to Resource scheduling.

  5. Configure the Scheduling Options and Scheduling Permissions as needed. (See the descriptions of all options in the following two sections for details.)

  6. Click Save after you have finished making your changes.

Us History Mr Mac S Rooms

Scheduling Options

  • Automatically process meeting requests and cancellations

Enables or disables all options below as well as the options under Scheduling Permissions. If not checked, the owner must manage every request manually. By default, this is not checked.

  • Disable reminders

Enables or disables reminders for events in this calendar. This setting applies only to the resource; the organizer and attendees will still receive reminders if they have elected to do so.

  • Maximum number of days in advance resources can be booked

Limits how far in advance an event can be scheduled. The default is 180 days.

  • Always decline if the end date is beyond this limit

Requests beyond the maximum number of days specified will be automatically declined. Valid values are between 0 (today) and 1080 (about three years in the future).

  • Limit meeting duration and Maximum allowed minutes

Limits the amount of time for which a room can be scheduled within a single day. Unchecking the box will mean a meeting has no limit. Checking the box allows for a limit between 0 to 1440 minutes.

  • Allow scheduling only during working hours

If checked, an event can only be scheduled during the hours specified under Calendar Work Week in the Calendar tab. Events outside of working hours will be automatically declined.

  • Allow repeating meetings

Allows booking of the resource room at a regular interval. The event can be set to repeat over a specified duration of time (also called recurring).

  • Allow conflicts

Allow or prevent conflicting meeting requests (double booking). If repeating meetings are allowed as well, this setting will only apply to repeating meetings. When the resource is invited, it will need to be entered into the Attendees field as opposed to being chosen with the Add Rooms button.

  • Allow up to this number of individual conflicts

This setting specifies the maximum number of conflicts that are allowed for new repeating meeting requests. When set to 0, a recurring event will fail to schedule if one or more conflicting appointments already appear. When set to a number greater than 0, a recurring event is allowed the specified number of conflicts before being denied.

  • Allow up to this percentage of individual conflicts

This setting specifies the maximum percentage of meeting conflicts that are allowed for new repeating meeting requests. This is similar to specifying a number of individual conflicts (explained above), but in this case, a recurring event is allowed the specified percentage of conflicts before being denied.

Scheduling Permissions

  • These users can schedule automatically if the resource is available

By default, everyone can schedule this resource without the manual approval of the resource owner. If Select users and groups is selected, only the users and groups specified can schedule automatically. All other users or groups will receive a decline message. If Select users and groups is selected but no users or groups are specified, this option will be ignored.

  • These users can submit a request for owner approval if the resource is available

If everyone is selected, then all requests must receive manual approval by the resource owner. If Select users and groups is selected, only the specified users and groups require manual approval by the resource owner. Select users and groups is selected and left blank by default so that all requests are approved automatically.

  • These users can schedule automatically if the resource is available and can submit a request for owner approval if the resource is unavailable

When everyone is selected (the default setting), any request during an open time frame will be automatically approved. If the room is booked at the requested time, a form is submitted to the resource owner for manual approval. If Select users and groups is selected, only those specified will have the option to have the request manually approved; all others will have a conflicting request denied without the option of manual approval by the resource owner.

Change other room mailbox properties

After you create a room mailbox, you can make changes and set additional properties by using the Exchange admin center or the Exchange Management Shell.

Use the Exchange admin center to change room mailbox properties

  1. In the Exchange admin center, navigate to Recipients > Resources.

  2. In the list of resource mailboxes, click the room mailbox that you want to change the properties for, and then click Edit .

  3. On the room mailbox properties page, click one of the following sections to view or change properties (for booking options, see Change how a room mailbox handles meeting requests.

General

Use the General section to view or change basic information about the resource.

Us Historymr. Mac
  • Room name: This name appears in the resource mailbox list in the Exchange admin center and in your organization's address book. It can't exceed 64 characters if you change it.

  • Email address: This read-only box displays the email address for the room mailbox. You can change it in the Email Address section.

  • Capacity: Use this box to enter the maximum number of people who can safely occupy the room.

Click More options to view or change these additional properties:

  • Organizational unit: This read-only box displays the organizational unit (OU) that contains the account for the room mailbox. You have to use Active Directory Users and Computers to move the account to a different OU.

  • Mailbox database: This read-only box displays the name of the mailbox database that hosts the room mailbox. Use the Migration page in the Exchange admin center to move the mailbox to a different database.

  • Alias Use this box to change the alias for the room mailbox.

  • Hide from address lists: Select this check box to prevent the room mailbox from appearing in the address book and other address lists that are defined in your Exchange organization. After you select this check box, users can still send booking messages to the room mailbox by using the email address.

  • Department: Use this box to specify a department name that the room is associated with. You can use this property to create recipient conditions for dynamic distribution groups and address lists.

  • Company: Use this box to specify a company that the room is associated with, if applicable. Like the Department property, you can use this property to create recipient conditions for dynamic distribution groups and address lists.

  • Address book policy: Use this option to specify an address book policy (ABP) for the room mailbox. ABPs contain a global address list (GAL), an offline address book (OAB), a room list, and a set of address lists. To learn more, see Address book policies in Exchange Server.

    In the drop-down list, select the policy that you want associated with this mailbox.

  • Custom attributes: This section displays the custom attributes defined for the room mailbox. To specify custom attribute values, click Edit . You can specify up to 15 custom attributes for the recipient.

Contact Information

Use the Contact Information section to view or change the contact information for the room. The information on this page is displayed in the address book.

Tip

You can use the State/Province box to create recipient conditions for dynamic distribution groups, email address policies, or address lists.

Email Address

Use the Email Address section to view or change the email addresses associated with the room mailbox. This includes the mailbox's primary SMTP address and any associated proxy addresses. The primary SMTP address (also known as the reply address) is displayed in bold text in the address list, with the uppercase SMTP value in the Type column.

  • Add: Click Add to add a new email address for this mailbox. Select one of following address types:

    • SMTP: This is the default address type. Click this button and then type the new SMTP address in the Email address box.

    • EUM: An EUM (Exchange Unified Messaging) address is used by the Microsoft Exchange Unified Messaging service in Exchange 2016 to locate UM-enabled recipients within an Exchange organization. EUM addresses consist of the extension number and the UM dial plan for the UM-enabled user. Click this button and type the extension number in the Address/Extension box. Then click Browse and select a dial plan for the mailbox. (Note: Unified Messaging is not available in Exchange 2019.)

    • Custom address type: Click this button and type one of the supported non-SMTP email address types in the Email address box.

      Notes:

      • With the exception of X.400 addresses, Exchange doesn't validate custom addresses for correct formatting. You must make sure that the custom address you specify complies with the format requirements for that address type.

      • When you add a new email address, you have the option to make it the primary SMTP address.

  • Automatically update email addresses based on the email address policy applied to this recipient: Select this check box to have the recipient's email addresses automatically updated based on changes made to email address policies in your organization.

MailTip

Use the MailTip section to add a MailTip to alert users of potential issues before they send a booking request to the room mailbox. A MailTip is text that's displayed in the InfoBar when this recipient is added to the To, Cc, or Bcc lines of a new email message.

Note

MailTips can include HTML tags, but scripts aren't allowed. The length of a custom MailTip can't exceed 175 displayed characters. HTML tags aren't counted in the limit.

Use the Exchange Management Shell to change room mailbox properties

Use the following sets of cmdlets to view and change room mailbox properties: Get-Mailbox and Set-Mailbox cmdlets to view and change general properties and email addresses for room mailboxes. Use the Get-CalendarProcessing and Set-CalendarProcessing cmdlets to view and change delegates and booking options.

  • Get-User and Set-User: Use these cmdlets to view and set general properties such as location, department, and company names.

  • Get-Mailbox and Set-Mailbox: Use these cmdlets to view and set mailbox properties, such as email addresses and the mailbox database.

  • Get-CalendarProcessing and Set-CalendarProcessing: Use these cmdlets to view and set booking options and delegates.

For information about these cmdlets, see the following topics:

Us History Mr Mac S Room Layout

Here are some examples of using the Exchange Management Shell to change room mailbox properties.

This example changes the display name, the primary SMTP address (called the default reply address), and the room capacity. Also, the previous reply address is kept as a proxy address.

This example configures room mailboxes to allow booking requests to be scheduled only during working hours and sets a maximum duration of 9 hours.

This example uses the Get-User cmdlet to find all room mailboxes that correspond to private conference rooms, and then uses the Set-CalendarProcessing cmdlet to send booking requests to a delegate named Robin Wood to accept or decline.

Create a room list

If you're planning to have more to have hundreds of rooms, use multiple room lists to help you organize your rooms. If your company has several buildings with rooms that can be booked for meetings, it might help to create room lists for each building. Room lists are specially marked distribution groups that you can use the same way you use distribution groups. However, you can only create room lists using the Exchange Management Shell.

Note

Although there is no hard limit to the number of rooms you can have in a Room List, the maximum number of rooms that can be returned in request for a Room List is 100. A possible workaround would be to further break down your rooms into smaller lists.

Mac

Use the Exchange Management Shell to create a room list

This example creates a room list for building 32.

Use the Exchange Management Shell to add a room to a room list

This example adds confroom3223 to the building 32 room list.

Use the Exchange Management Shell to convert a distribution group to a room list

You may already have created distribution groups in the past that contain your conference rooms. You don't need to recreate them; we can convert them quickly into a room list.

This example converts the distribution group, building 34 conference rooms, to a room list.

How do you know this worked?

Us History Mr Mac S Roommate

To verify that you've successfully changed properties for a room mailbox, do the following:

Us History Mr Mac S Room Divider

  • In the Exchange admin center, select the mailbox and then click Edit to view the property or feature that you changed. Depending on the property that you changed, it might be displayed in the Details pane for the selected mailbox.

  • In the Exchange Management Shell, use the Get-Mailbox cmdlet to verify the changes. One advantage of using the Exchange Management Shell is that you can view multiple properties for multiple mailboxes. In the example above where booking requests could be scheduled only during working hours and have a maximum duration of 9 hours, run the following command to verify the new values.